Help centre · Call forwarding
Updated
Landlines and internet phones can forward too, but it works differently from mobiles. Most providers charge a small monthly fee for call diversion and switch it on for you first. The steps also depend on whether your line is fibre or old copper.
In every case you'll need your receptionist number from the Phone Numbers page.
Spark home or business landline
Call diversion is part of Spark's paid calling features (on fibre and wireless lines it's in the "Advanced" pack).
- Fibre or wireless landline: once the feature is on, you can set diversion in MySpark, or with codes from your handset. Spark has separate codes for "no answer", "busy" and "all calls", and you can change how many rings before it diverts. The codes are on Spark's help page for fibre and wireless call features.
- Old copper line: diversion uses Spark's older "181" codes and is a monthly add-on.
The easiest route is to ask Spark to turn on call diversion for no answer and busy, to your receptionist number.
One NZ home or business landline
- Internet-based home phone (fibre or cable): call divert is a monthly add-on that One NZ switches on for you. After that, you set it from the handset. One NZ's codes are
*92for no answer (it diverts after about 10 seconds),*90for busy and*72for all calls, and*93,*91and*73turn them off. One NZ's "phone divert service" help page has the exact steps for entering the number. - Old copper line: diversion uses One NZ's "181" codes and is also a monthly add-on.
One NZ says the person who sets up the divert pays for the diverted part of each call.
2degrees home phone
- Home Phone Plus: set it yourself in Your2degrees → Home Phone Plus → settings → Call Forwarding. Choose "no answer", "busy" or "all calls".
- Home Phone Basic: call 2degrees and ask them to set it up.
2degrees says calls forwarded to mobiles cost standard rates. Your receptionist number is an NZ landline number, so check your plan's rate for calls to NZ landlines.
Business VoIP systems (3CX, Teams Phone, Zoom Phone and others)
Forwarding is set in your phone system's admin portal, not with dial codes. Look for "call forwarding", "no answer rule" or "call routing". Set unanswered calls, or after-hours calls, to go to your receptionist number. If someone else manages your system, send them this page and your receptionist number.
After you set it up
Ask someone to call your landline from another phone, and don't answer. Your receptionist should pick up after the rings.
Not sure what your line is, or which feature to ask for? Email [email protected] with your provider's name and we'll help you work it out.